OSHA 30 Hr General Industry General (Interactive Online) English Not valid in New York City
OSHA Policies:
OSHA has issued a policy that limits all OSHA Outreach Training (classroom and online) to a maximum of 7.5 hours training per day in all OSHA 30-Hour courses. As a result, all 30-Hour courses must be delivered over a minimum of four days.
OSHA has also issued a policy of Program Jurisdiction Restrictions. Outreach Training Programs are now limited to OSHA Jurisdiction only. Student course completion cards can only be issued for students within U.S. jurisdiction (the 50 States and certain U.S. Territories).
This course does NOT meet the requirements in New York City
Individuals have 180 days to complete training from the start of the program and receive an OSHA course completion card upon finishing.
A link to the course will be sent to the email that you provided within 48 hours.
OSHA 30-Hour training helps prevent costly accidents, incidents and OSHA fines at your site.
Courses include:
Introduction to OSHA
Employee Safety Orientation
Back Safety and Injury Prevention
Workplace Hazard Recognition
Incident Investigation
Slips, Trips, and Falls
Scaffold Safety
Emergency and Fire Preparedness
Fire Extinguisher Safety
Fire Extinguisher: Monthly Inspections
Active Shooter Response
Earthquake Preparedness
Hurricane Preparedness
Tornado Preparedness
Electrical Safety: General Awareness
Electrical Safety: Hazards, Controls, and Best Practices
Lockout Tagout
Arc Flash and Electrical Safety Best Practices
PPE: Fundamentals
PPE: Head Protection
PPE: Eye and Face Protection
PPE: Hearing Protection
PPE: Hand Protection
PPE: Foot Protection
PPE: Respiratory Protection
Hazardous Material Transportation: Handling Non-Bulk Packages
Powered Industrial Truck Safety
Intro to Loading Dock Safety
Intro to Pallet Jack Safety
Intro to Safe Material Storage
Conveyor Safety
Overhead and Gantry Crane Safety
Hazard Communication
Industrial Ergonomics
Office Ergonomics
Workplace Signs, Labels, and Tags
Chemical Safety
Compressed Gas Safety
Flammable Liquid
Intro to Spray-Finishing Hazards
Intro to Hexavalent Chromium
Intro to Benzene Hazards
Intro to Beryllium Hazards
Chlorine Safety
Formaldehyde Safety
Hydrogen Sulfide Safety
Intro to Combustible Dust Hazards
Preventing Spills
Confined Space Entry: Permit Required
Cold Stress
Heat Stress
Hand and Power Tool Safety
Intro to Personal Safety
Behavior-Based Safety
Process Safety Management
Forklift - Fundamentals
Forklift - Safe Driving
Forklift - Load Handling
Forklift - Stability and Capacity
Forklift - Inspection and Maintenance
Mobile Elevating Work Platforms - Aerial and Scissor Lift Safety
Winter Weather Driving
Passenger Van Driver Safety
Respiratory Protection
Eye Safety
Hearing Conservation
Indoor Air Quality
Intro to Mold and Mildew Hazards
Laser Safety
Intro to Cadmium Hazards
Liquid Nitrogen Safety
X-Ray Safety
Hot Work
Bloodborne Pathogens
Personal Fall Arrest Systems
Stairway Hazards
Ladder Safety
Mobile Ladder Safety
Cold, Flu, and Transmissible Illness Prevention
Fatigue and Stress Awareness
Mosquitos, Tick, and Vector-Borne Illnesses
OSHA Work-Related
OSHA Policies:
OSHA has issued a policy that limits all OSHA Outreach Training (classroom and online) to a maximum of 7.5 hours training per day in all OSHA 30-Hour courses. As a result, all 30-Hour courses must be delivered over a minimum of four days.
OSHA has also issued a policy of Program Jurisdiction Restrictions. Outreach Training Programs are now limited to OSHA Jurisdiction only. Student course completion cards can only be issued for students within U.S. jurisdiction (the 50 States and certain U.S. Territories).
This course does NOT meet the requirements in New York City
Individuals have 180 days to complete training from the start of the program and receive an OSHA course completion card upon finishing.
A link to the course will be sent to the email that you provided within 48 hours.
OSHA 30-Hour training helps prevent costly accidents, incidents and OSHA fines at your site.
Courses include:
Introduction to OSHA
Employee Safety Orientation
Back Safety and Injury Prevention
Workplace Hazard Recognition
Incident Investigation
Slips, Trips, and Falls
Scaffold Safety
Emergency and Fire Preparedness
Fire Extinguisher Safety
Fire Extinguisher: Monthly Inspections
Active Shooter Response
Earthquake Preparedness
Hurricane Preparedness
Tornado Preparedness
Electrical Safety: General Awareness
Electrical Safety: Hazards, Controls, and Best Practices
Lockout Tagout
Arc Flash and Electrical Safety Best Practices
PPE: Fundamentals
PPE: Head Protection
PPE: Eye and Face Protection
PPE: Hearing Protection
PPE: Hand Protection
PPE: Foot Protection
PPE: Respiratory Protection
Hazardous Material Transportation: Handling Non-Bulk Packages
Powered Industrial Truck Safety
Intro to Loading Dock Safety
Intro to Pallet Jack Safety
Intro to Safe Material Storage
Conveyor Safety
Overhead and Gantry Crane Safety
Hazard Communication
Industrial Ergonomics
Office Ergonomics
Workplace Signs, Labels, and Tags
Chemical Safety
Compressed Gas Safety
Flammable Liquid
Intro to Spray-Finishing Hazards
Intro to Hexavalent Chromium
Intro to Benzene Hazards
Intro to Beryllium Hazards
Chlorine Safety
Formaldehyde Safety
Hydrogen Sulfide Safety
Intro to Combustible Dust Hazards
Preventing Spills
Confined Space Entry: Permit Required
Cold Stress
Heat Stress
Hand and Power Tool Safety
Intro to Personal Safety
Behavior-Based Safety
Process Safety Management
Forklift - Fundamentals
Forklift - Safe Driving
Forklift - Load Handling
Forklift - Stability and Capacity
Forklift - Inspection and Maintenance
Mobile Elevating Work Platforms - Aerial and Scissor Lift Safety
Winter Weather Driving
Passenger Van Driver Safety
Respiratory Protection
Eye Safety
Hearing Conservation
Indoor Air Quality
Intro to Mold and Mildew Hazards
Laser Safety
Intro to Cadmium Hazards
Liquid Nitrogen Safety
X-Ray Safety
Hot Work
Bloodborne Pathogens
Personal Fall Arrest Systems
Stairway Hazards
Ladder Safety
Mobile Ladder Safety
Cold, Flu, and Transmissible Illness Prevention
Fatigue and Stress Awareness
Mosquitos, Tick, and Vector-Borne Illnesses
OSHA Work-Related
OSHA Policies:
OSHA has issued a policy that limits all OSHA Outreach Training (classroom and online) to a maximum of 7.5 hours training per day in all OSHA 30-Hour courses. As a result, all 30-Hour courses must be delivered over a minimum of four days.
OSHA has also issued a policy of Program Jurisdiction Restrictions. Outreach Training Programs are now limited to OSHA Jurisdiction only. Student course completion cards can only be issued for students within U.S. jurisdiction (the 50 States and certain U.S. Territories).
This course does NOT meet the requirements in New York City
Individuals have 180 days to complete training from the start of the program and receive an OSHA course completion card upon finishing.
A link to the course will be sent to the email that you provided within 48 hours.
OSHA 30-Hour training helps prevent costly accidents, incidents and OSHA fines at your site.
Courses include:
Introduction to OSHA
Employee Safety Orientation
Back Safety and Injury Prevention
Workplace Hazard Recognition
Incident Investigation
Slips, Trips, and Falls
Scaffold Safety
Emergency and Fire Preparedness
Fire Extinguisher Safety
Fire Extinguisher: Monthly Inspections
Active Shooter Response
Earthquake Preparedness
Hurricane Preparedness
Tornado Preparedness
Electrical Safety: General Awareness
Electrical Safety: Hazards, Controls, and Best Practices
Lockout Tagout
Arc Flash and Electrical Safety Best Practices
PPE: Fundamentals
PPE: Head Protection
PPE: Eye and Face Protection
PPE: Hearing Protection
PPE: Hand Protection
PPE: Foot Protection
PPE: Respiratory Protection
Hazardous Material Transportation: Handling Non-Bulk Packages
Powered Industrial Truck Safety
Intro to Loading Dock Safety
Intro to Pallet Jack Safety
Intro to Safe Material Storage
Conveyor Safety
Overhead and Gantry Crane Safety
Hazard Communication
Industrial Ergonomics
Office Ergonomics
Workplace Signs, Labels, and Tags
Chemical Safety
Compressed Gas Safety
Flammable Liquid
Intro to Spray-Finishing Hazards
Intro to Hexavalent Chromium
Intro to Benzene Hazards
Intro to Beryllium Hazards
Chlorine Safety
Formaldehyde Safety
Hydrogen Sulfide Safety
Intro to Combustible Dust Hazards
Preventing Spills
Confined Space Entry: Permit Required
Cold Stress
Heat Stress
Hand and Power Tool Safety
Intro to Personal Safety
Behavior-Based Safety
Process Safety Management
Forklift - Fundamentals
Forklift - Safe Driving
Forklift - Load Handling
Forklift - Stability and Capacity
Forklift - Inspection and Maintenance
Mobile Elevating Work Platforms - Aerial and Scissor Lift Safety
Winter Weather Driving
Passenger Van Driver Safety
Respiratory Protection
Eye Safety
Hearing Conservation
Indoor Air Quality
Intro to Mold and Mildew Hazards
Laser Safety
Intro to Cadmium Hazards
Liquid Nitrogen Safety
X-Ray Safety
Hot Work
Bloodborne Pathogens
Personal Fall Arrest Systems
Stairway Hazards
Ladder Safety
Mobile Ladder Safety
Cold, Flu, and Transmissible Illness Prevention
Fatigue and Stress Awareness
Mosquitos, Tick, and Vector-Borne Illnesses
OSHA Work-Related